- Polyester Resin Impregnated Fiberglass Banding Tape
- Epoxy Resin Impregnated Fiberglass Banding Tape
- Woven Tape Impregnated with Polyester or Epoxy Resin
- Glass Fiber Mesh Impregnated With Epoxy Resin For Transformer Reinforcing
- Glass Cloth Silicone Pressure Sensitive Adhensive Tape
- DMD/DMD Prepreg Insulating Material For Electrical Use
- E-glass Tape/E-Glass Net Tape/Edge Banding Tape Without Wax
- Layer Laminated Insulation Materials
- Polyester Fiber Shrinkable Tape
- Polyimide Film Silicone Pressure Sensitive Adhensive Tape
- E-glass Fiber Insulation Sleeving
- Polyester Fiber E-glass Filament Interlace Tape
- E-textured Tape, Cord/Fiberglass Cord/Polyester Jacket Glass Cord
- E-glass Cloth/Fabric
- Glass Fiber Filter Netting
- Mica Tape for VPI
- Electrical Insulation Mica Tape
- Insulating Laminated Products
- 产品中心
- 您所在的位置: 首页 > 产品中心 > E-glass Fiber Insulation Sleeving >
Our company specializes in manufacturing varied kinds of glass fiber insulation sleevings. They are silicone resin coated sleeving、direction knit sleeving、acrylic resin coated sleeving、self-extinguishing sleeving、PVC coated sleeving. The products are mainly used in laying and insulation and protection. With their excellent characteristics such as good flexibility、heat and tremble resistance、oil resistance, they are necessary insulating materials for electronic industry and maintenance of electrical devices.
Property of silicone rubber coated fiberglass sleeving-2751
Item
Figure
Elasticity
The coated film shouldn't break away from glass
fiber or craze after treated at the temperature of 200±5℃ for 3 hours.
Flame retardant
method B for less than 60 seconds
Heat resistance
The coated film shouldn't break away from glass
fiber or craze after treated at the temperature of 200±5℃ for 72 hours.
Breakdown voltage(V)
Under normal condition
1500/2500/4000/7000
Under moist condition
450/800/1200/2200
Property of self-extinguishing fiberglass sleeving
ltem
Figure
Flame retardant
The lacquer film shouldn't come away and colour
won't be changed at constant temperature of 250±3℃ for 24 hours
Self-extinguish
Less than 10 seconds when diameter is smaller than
3.5mm
Breakdown voltage(V)
1500/2500/4000/7000
Propetry of PVC coated fiberglass sleeving
ltem
Figure
Bending after heat treated
The Coated film shouldn't break away or craze
after treated at the temperature of 100±2℃ for 96 hours.
Bending at low temperature
The Coated film shouldn't break away or craze
after treated at the temperature of 25±1℃ below zero for 96 hours.
Test condition
Breakdown voltage(V)
Under moist condition
1200
Property of acrylic resin coated sleeving
ltem
Figure
Figure
Breakdown voltage(V)
Type II
Normal condition
≥2500
Under moist condition
≥1200
After enwinding
≥1400
Glass fiber greige braided sleeving
ltem
Figure
Heat resistance
≥400℃
Internal diameter
Φ0.5 mm---Φ70 mm
Wall thickness
0.2mm --1mm
polyester fiber sleeve
E-glass Fiber Insulation Sleeving
fiberglass sleeving application
Glass fiber greige braided sleeving
Less than 15 seconds when diameter is smaller than 4mm